







Product Details
Characteristics of Honeycomb Activated Carbon Products
Honeycomb activated carbon is made of high-quality coal through high temperature. The appearance is black, non-toxic and tasteless, with developed void structure, strong adsorption capacity and high wear resistance. It is widely used in solvent recovery, coal contact carrier, gas phase adsorption and water purification in chemical industry, environmental protection, power plant, electronics, petrochemical, aquaculture, medicine, shipping and other industries.
Technical Proces
It is mainly used to remove pollutants in the air and to separate and purify gases.
Functional Characteristics
It is suitable for the treatment of organic waste in high air volume,low concentration factories, industrial waste gas, and deodorization in daily life. It can also be used as catalyst carrier.
Product Parameter
Specification(mm): 50 * 50 *100mm 100*100*10omm
Normal compressive strength: greater than 0.8mpa
Service temperature: less than 400 ℃ aperture: 1.5mm ~ 8mm
Hole tower speed: 0.8m/s specific surface area: more than 700 m2 / g
Appearance: the surface of the product is flat without cracks
| Project | Ordinary Honeycomb Carbon | Water Resistant Honeycomb Carbon |
| Specification (mm) | 100*100*100 100*100*50
50*50*100 50*50*50 |
50*50*100 50*50*50
100*100*100 100*100*50 |
| Lodine Adsorption Value (mg/ g) | ≥900 | ≥900 |
| Specific Surface Area (m2 / g) | 950 | 950 |
| Carbon Tetrachloride Adsorption Rate | ≥70 | ≥70 |
| Benzene Adsorption | ≥65 | ≥65 |
| Normal Compressive Strength | ≥0.7 | ≥0.8 |
| Lateral Compressive Strength | ≥0.4 | ≥0.4 |
| Water Content | ≤5 | ≤2 |
| Pore Density | 50-300 | 50-300 |
| Bulk Density | 0.3-0.55 | 0.3-0.55 |
| Service Temperature | ≤400 | ≤400 |
| Desorption Temperature | ≤120 | ≤120 |
| Hole Tower Wind Speed | 0.8 | 0.8 |
| Water Resistance | NO | YES |